Arnhem Underground shows what is buried under 3 km² of central Arnhem in the Netherlands: the power cables of the grid operator Liander and the city's sewer pipes at their measured depth, with manholes, street cabinets and trees. Look through the street with an x-ray lens, draw a trench to see what it would run into, and follow the wastewater from any pipe to where it leaves the area.
What you can do
Move an x-ray lens along any street: cables and pipes show through, with a live list of what is under the cursor and its depth. Click to pin it and open a depth profile.
Draw a trench to get an excavation report: every cable, sewer pipe, manhole, cabinet and tree it meets, with depths, conflicts and a long section, ready to download as CSV or print.
Click any sewer pipe to follow its water downhill, see every pipe that drains into it and which buildings depend on it.
Simulate a blockage and see which buildings would be affected.
Show depth at true scale or exaggerated, and see through the whole street level at once.
Data and how it was built
Sewer pipes and manholes with their invert levels, sizes and materials come from Gemeente Arnhem and are set against AHN ground heights, so their depths are measured. Cable routes and stations come from Liander's open data (November 2026). Buildings are 3DBAG LoD2 models from TU Delft, and streets, trees and surfaces come from BGT and NWB. The page runs on Three.js.
Some parts are modelled and labelled as such: cable depths (typical Dutch depths), the last metres of cable to each building, and which building drains into which sewer pipe (the nearest combined or foul sewer). Gas, water, telecom and heat networks are not open data, so a real excavation still needs a KLIC report.
Who uses underground maps like this
Contractors preparing excavations
Municipalities and water boards managing sewers
Utility asset managers and engineering consultants
Street works coordinators
For your network
We combine your own network data, surveys and KLIC deliveries into one 3D view of what is under the street, with excavation reports, clash checks and sewer tracing for your teams.
Frequently asked questions
Are the sewer depths real?
Yes. Gemeente Arnhem publishes the invert level of each pipe at both ends. Subtracting it from the AHN ground height gives the depth below the street.
Are the cable depths real?
No. Liander does not publish cable depths, so the demo uses typical Dutch depths (0.6 m for low voltage, 0.8 m for medium voltage) and says so next to every value.
Can this show gas, water and telecom lines?
Not from open data in the Netherlands. Those networks are shared with excavators through KLIC notifications. A version for a utility or contractor would use that data.