Arnhem Power Grid shows the electricity network of 3 km² of central Arnhem in the Netherlands: every low- and medium-voltage cable and transformer station of the grid operator Liander, and the electricity each street uses. You can trace any house to its transformer, watch a day of rooftop solar, put a fault on a cable and see how the network brings power back, and find where there is still room for new connections.
What you can do
Colour every building by the transformer station that feeds it, by station loading, by electricity use or by the room left for new connections.
Click a house to see its yearly electricity, gas and solar, and the cable route back to its transformer and the high-voltage substation.
Play a winter day or a sunny summer day and watch stations turn from drawing power to pushing rooftop solar back up the network.
Put a fault on any cable to see which customers lose power, how switching at a street cabinet or the medium-voltage ring restores them, and the customer minutes saved.
See the stations with the most room, and the tightest ones, with the number of extra EV chargers each could take.
Plan a connection for an EV charger, heat pumps, a fast-charging hub or a new apartment block, routed along the streets to a station with room.
Raise the share of heat pumps and electric cars to 2030 and 2035 and watch which stations fill up.
Open Connected systems to see how the map exchanges data with SCADA and ADMS, outage management, field crews, asset management, smart meter data, network analysis and connection requests (simulated with mock data).
Data and how it was built
Cable routes and stations come from Liander's open data (November 2026). Electricity, gas and solar feed-in per postcode group come from Liander's small-user data dated 1 January 2025 (use during 2024), matched to 16,344 addresses from the BAG address register. Buildings are 3DBAG LoD2 models from TU Delft, and streets, trees and surfaces come from BGT and NWB. The page runs on Three.js.
Some parts are modelled and labelled as such: which station feeds which building (traced along the real cables, because switch positions are not public), the last metres of cable to each building, transformer sizes, peak load (estimated from yearly use with Velander's rule of thumb), the daily load and clear-sky solar profiles, and switching and repair times in the outage view.
Connect it to your systems
A grid map earns its keep when it is connected. In this demo every connection is simulated with mock data, to show how it works: switch states and alarms come in from SCADA and ADMS (read-only, through a separated security zone), outage tickets and crews flow through the outage and field service systems, asset records and work orders come from asset management, measured loads from smart meter data aggregated per station, and network models go out to load flow tools as IEC CIM.
We connect to the systems you already license, such as SAP PM, Maximo, PowerFactory, CYME or ArcGIS Utility Network, or build open-source and custom ones where a licence does not pay off, such as PostGIS, pandapower and OpenDSS. SCADA and ADMS are never replaced; they are connected read-only.
Who uses grid maps like this
Electricity grid operators and their planners
EV charging and solar companies looking for grid room
Developers checking capacity before they buy
Municipal energy and heat transition teams
For your network
We load your own network data from your GIS or ArcGIS Utility Network and connect it to the systems around it: switch states from SCADA, asset records and work orders from asset management, measured loads from smart meters, and models to and from your network analysis tool. The result is a secure web app for planners and control rooms: tracing, capacity checks, outage scenarios and connection planning, on your own data.
Frequently asked questions
Where does the electricity network data come from?
Liander, the grid operator for Arnhem, publishes the routes of its cables and the locations of its stations as open data. It does not publish switch positions or transformer ratings, so those are modelled in this demo.
Is the solar and load curve measured?
No. Yearly use and solar feed-in are Liander's real figures; the shape over the day is a typical household load curve and clear-sky solar for Arnhem, scaled to those yearly totals.
Can it use our own network data?
Yes. With your network model, switch states and meter data the tracing, outages and capacity become exact instead of modelled.
Can it connect to our SCADA, asset management or meter data?
Yes. Links to SCADA and ADMS are read-only, through a separated security zone, so the map can show live switch states and alarms but never operate anything. Asset management (for example SAP PM or Maximo, or a custom register) and smart meter data (aggregated per station) connect through APIs or batch files. The connections shown in this demo are simulated with mock data.
Which standards do you support?
IEC CIM (61968 and 61970) for network models, meter reading and work orders, plus REST, OData and MQTT for system-to-system data, OGC services and Esri feature services for map data, and GeoJSON and CSV exports. The same standards work with commercial and with open-source tools.